Page Background Header

Test Equipment

Flight Line Test Set


Flight Line Test Set

NavCom Part Number: 8010000791-1

Key Features
  • Installed in a ruggedized case suitable for use in a flight-line environment
  • Weighs approximately thirteen (13) kilograms, with all accessories included
  • The test set stands 28 centimeters tall, 37 centimeters wide, and 41 centimeters long
  • All controls and inputs/outputs are accessible and visible from the top of the opened test set
  • Compartments for the transducers and cables are included in the enclosure
  • The RF cables are of sufficient length to be usable on most aircraft

Description

NavCom provides the CARA Flight Line Test Set (FLTS) for the purpose of verifying total CARA system functionality at the organization level on the aircraft. The test set is intended for use as a general purpose fault isolation tool for testing of the CARA Receiver-Transmitter (RT), antenna cables, and antennas.

The FLTS can be used in the following modes of operation:

Antenna Coupled – In this mode, the RF path is through transducers which are mounted to the antennas. The transducers are capable of operation with aircraft which use CARA fixed wing and F-16 antennas which are mounted directly to the skin.

Direct Coupled – In this mode, the RF path does not include the antennas. The test set cables are connected either directly to the RT or to the RT through the antenna cables.

Three delay values (simulated altitudes) are available. The first equates to a very low altitude which simulates ground operation. The other delays are equivalent to approximately 150 and 2,500 feet in altitude. The attenuation in each delay path is such that loss of track is obtained when the variable attenuator is set to its maximum value.